Eizo FlexScan S2000 Uživatelský manuál Strana 30

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 40
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 29
28
Chapter 5 Reference
Chapter 5 Reference
5-1 Attaching an Arm (Option)
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3
Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws speci ed in the
users manual of the arm or stand.
5-2 Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better nishing.
Attention
When attaching an arm or stand,
follow the instructions of their users
manual.
When using another manufacturers
arm or stand, con rm the following in
advance and select one conforming to
the VESA standard. Use M4 × 15 mm
screws xing the unit and stand.
– Clearance between the screw holes:
100 mm × 100 mm
Thickness of plate: 2.6 mm
Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
Attach an arm or stand to meet the
following tilt angles of the monitor.
Up 45 degrees, down 45 degrees
Up 45 degrees, down 45 degrees
(vertical display, 90 degrees
clockwise)
Connect the cables after attaching an
arm.
Attention
Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
NOTE
Optional ScreenCleaner is
recommended for cleaning the panel
surface.
Zobrazit stránku 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Komentáře k této Příručce

Žádné komentáře