Eizo ColorEdge CG211 Calibration Color LCD Monitor Uživatelský manuál stáhnout pdf (Strana 4)

complete (approximately 10 seconds), click on the LCD display screen to select it for

SWOP Coated #3 color confirmation.

c. Position the Kodak Monitor Calibrator flat against the display within the on-screen outline

and press any key.

d. In the Measurement dialog box, click Color Check. If C3_AutoSWOPADS.EizoCG211

has not been previously selected, click Choose, select C3_AutoSWOPADS.EizoCG211

and click Open.

e. Once C3_AutoSWOPADS.EizoCG211 has been selected, click Continue in the Color

Check dialog box. Re-confirm placement of the Kodak Monitor Calibrator and press any

key.

f. A series of color patches (noted in Appendix 2) automatically appears successively on-

screen.

g. When automatic color measurement is complete, a data table is presented on screen.

Within this table are actual color measurement values and Delta E comparisons for each

color with values in Appendix 2 of this ADS. To print this table, navigate to the Dock |

Matchprint Virtual Folder | Log Files | AutoLabCheckLogs and select the corresponding

file from the list. Macintosh TextEdit application will open the file, which can be printed

from File | Print.

VI. Finishing Procedures

None required.

VII. Finished Proof Characteristics

A Matchprint Virtual Proof with color characteristics referenced in Appendix 1 is to be expected when an

on-screen ADS Proofing Certification Strip is measured using an X-Rite Eye One Pro spectrophotometer

with the Kodak-supplied SWOP Coated #3 color profile applied.

Note: Three-color grays are comprised of Cyan, Magenta, Yellow: 75, 66, 66; 50, 40, 40; and 25, 19, 19

values.

As a preferred alternative, Kodak recommends the supplied Matchprint Virtual Monitor Calibrator for either

manual or automatic verification of color compliance to SWOP Coated #3 standards. With this instrument,

color values and tolerances noted in Appendix 2 apply.

VIII. Sample Proofs

Kodak has made this Application Data Sheet and the corresponding Matchprint Virtual system available to

the IDEAlliance certifying contractor to perform independent, corroborating measurements in the course of

SWOP Coated #3 certification.

1 2 3 4 5 6

Žádné komentáře

Eizo ColorEdge CG211 Calibration Color LCD Monitor Uživatelský manuál Strana 4